Phone: 0417 211 034 | 0412 673 995
Super Sopper Replacement Sponge
Replacement sponge for Super Sopper. Suits both the Sandpiper and Minnow.
Enter your e-mail address to be notified when product is in stock
Notify Me!
The Sandpiper sponge is 1910 mm long x 510 mm wide x 35mm thick, which can be cut down for the Minnow.
Sometimes after you roll these sponges up in winter, they shrink.
Best to lay them in the hot sun to regain their size.

Laminate Glue
(You can get the glue from a hardware store. The type of glue is for kitchen bench-tops)
Wire Brush
Paint Brush
Step 1    Remove the old foam with a wire brush so that the surface is clean.
Step 2    Place glue on the barrel at the start of the foam across the drum.
Step 3    Then a constant line of glue down the sides of the drum at the width of the foam.
Step 4    Randomly place blobs of glue in the middle of the drum
NOTE:    Do not to cover all the holes as the laminate glue is waterproof and will not allow water to go into the catchment tray.
Step 5    Place the edge of the foam onto the line of glue that crosses the drum.
Step 6    Slowly roll the super sopper and work the foam into place.
              Repeat steps 3 -5 until foam has covered the drum.
Step 7    Cut the foam to length if required.
Step 8    Finish with a line of glue across the drum at the end of the placement of foam.
Currently there are no reviews for this product.
Currently there are no questions for this product.
Join us on  Facebook
Currency Converter


About Us | Privacy | Returns | Shipping | Sites We Like
2007 © Jadee Sporting Distributors Pty Ltd